High Precision | Exceptional Efficiency
Superior Penetration
250m/450m Detection Range
5 Returns
Turnkey Solution
Point Cloud LiveView
One-Click Processing on DJI Terra

HIGH-PRECISION AERIAL LIDAR SYSTEM

Zenmuse L2 integrates frame LiDAR, a self-developed high-accuracy IMU system, and a 4/3 CMOS RGB mapping camera, providing DJI flight platforms with more precise, efficient, and reliable geospatial data acquisition. When used with DJI Terra, it delivers a turnkey solution for 3D data collection and high-accuracy post-processing.

Specifications

General

Product Name
Zenmuse L2

Dimensions
155×128×176 mm (L×W×H)

Weight
905±5 g

Power
28 W (typical)
58 W (max.)

IP Rating
IP54

Supported Aircraft
Matrice 300 RTK (requires DJI RC Plus)
Matrice 350 RTK

Storage Temperature
-20° to 60° C (-4° to 140° F)

System Performance

Detection Range
450m @50% reflectivity, 0 klx
250m @10% reflectivity, 100 klx

^{Typical data. Measured using a flat subject with a size larger than the laser beam diameter, perpendicular angle of incidence, and an atmospheric visibility of 23 km.}^{In low-light environments, the laser beams can achieve the optimal detection range. If a laser beam hits more than one subject, the total laser transmitter power is split, and the achievable range is reduced. The maximum detection range is 500 m.}

Point Cloud Rate
Single return: max. 240,000 pts/s
Multiple returns: max. 1,200,000 pts/s

System Accuracy
Horizontal: 5 cm @ 150 m
Vertical: 4 cm @ 150 m

^{Measured under the following conditions in a DJI laboratory environment: Zenmuse L2 mounted on a Matrice 350 RTK and powered up. Using DJI Pilot 2’s Area Route to plan the flight route (with Calibrate IMU enabled). Using repetitive scanning with the RTK in the FIX status. The relative altitude was set to 150 m, flight speed to 15 m/s, gimbal pitch to -90°, and each straight segment of the flight route was less than 1500 m. The field contained objects with obvious angular features, and used exposed hard ground check points that conformed to the diffuse reflection model. DJI Terra was used for post-processing with Optimize Point Cloud Accuracy enabled. Under the same conditions with Optimize Point Cloud Accuracy not enabled, the vertical accuracy is 4 cm and the horizontal accuracy is 8 cm.}

Real-Time Point Cloud Coloring Coding
Reflectivity, Height, Distance, RGB

LiDAR

Ranging Accuracy (RMS 1σ)
2 cm @ 150 m

^{Measured in an environment of 25° C (77° F) with a subject of 80% reflectivity at a distance of 150 m. The actual environment may differ from the testing environment. The figure listed is for reference only.}

Maximum Returns Supported
5

Scanning Modes
Non-repetitive scanning pattern, Repetitive scanning pattern

FOV
Repetitive scanning pattern: Horizontal 70°, Vertical 3°
Non-repetitive scanning pattern: Horizontal 70°, Vertical 75°

Minimum Detection Range
3 m

Laser Beam Divergence
Horizontal 0.2 mrad, Vertical 0.6 mrad

^{Measured at full width at half maximum (FWHM) conditions. 0.6 mrad signifies that for every 100m increase in distance, the diameter of the laser beam expands by 6 cm.}

Laser Wavelength
905 nm

Laser Spot Size
Horizontal 4 cm, vertical 12 cm @ 100 m (FWHM)

Laser Pulse Emission Frequency
240 kHz

Laser Safety
Class 1 (IEC 60825-1:2014)

Accessible Emission Limit (AEL)
233.59 nJ

Reference Aperture
Effective Aperture: 23.85 mm (equivalent to circular)

Max Laser Pulse Emission Power Within 5 Nanoseconds
46.718 W

Inertial Navigation System

IMU Update Frequency
200 Hz

Accelerometer Range
±6 g

Angular Velocity Meter Range
±300 dps

Yaw Accuracy (RMS 1σ)
Real-time: 0.2°, Post-processing: 0.05°

^{Measured under the following conditions in a DJI laboratory environment: Zenmuse L2 mounted on a Matrice 350 RTK and powered up. Using DJI Pilot 2’s Area Route to plan the flight route (with Calibrate IMU enabled). RTK in the FIX status. The relative altitude was set to 150 m, flight speed to 15 m/s, gimbal pitch to -90°, and each straight segment of the flight route was less than 1500 m.}

Pitch/Roll Accuracy (RMS 1σ)
Real-time: 0.05°, Post-processing: 0.025°

^{Measured under the following conditions in a DJI laboratory environment: Zenmuse L2 mounted on a Matrice 350 RTK and powered up. Using DJI Pilot 2’s Area Route to plan the flight route (with Calibrate IMU enabled). RTK in the FIX status. The relative altitude was set to 150 m, flight speed to 15 m/s, gimbal pitch to -90°, and each straight segment of the flight route was less than 1500 m.}

Horizontal Positioning Accuracy
RTK FIX: 1 cm + 1 ppm

Vertical Positioning Accuracy
RTK FIX: 1.5 cm + 1 ppm

RGB Mapping Camera

Sensor
4/3 CMOS, Effective Pixels: 20 MP

Lens
FOV: 84°
Format Equivalent: 24 mm
Aperture: f/2.8-f/11
Focus Points: 1 m to ∞ (with autofocus)

Shutter Speed
Mechanical Shutter: 2-1/2000 s
Electronic Shutter: 2-1/8000 s

Shutter Count
200000

Photo Size
5280×3956 (4:3)

Still Photography Modes
Single shot: 20 MP
Timed: 20 MP
JPEG Timed Interval: 0.7/1/2/3/5/7/10/15/20/30/60 s
RAW/JPEG + RAW Timed Interval: 2/3/5/7/10/15/20/30/60 s

Video Codec and Resolution
H.264
4K: 3840×2160@30fps
FHD: 1920×1080 @30fps

ISO
Video: 100-6400
Photo: 100-6400

Video Bitrate
4K: 85Mbps
FHD: 30 Mbps

Supported File System
exFAT

Photo Format
JPEG/DNG (RAW)

Video Format
MP4 (MPEG-4 AVC/H.264)

Gimbal

Stabilization System
3-axis (tilt, roll, pan)

Angular Vibration Range
0.01°

Mounting
Detachable DJI SKYPORT

Mechanical Range
Tilt: -143° to +43°
Pan: ±105°

^{* Structural limit, not controllable range.}

Controllable Range
Tilt: -120° to +30°
Pan: ±90°

Operation Mode
Follow/Free/Re-center

Data Storage

Raw Data Storage
Photo/IMU/Point cloud/GNSS/Calibration files

Point Cloud Data Storage
Real-time modeling data storage

Supported microSD Cards
microSD: Sequential writing speed 50 MB/s or above and UHS-I Speed Grade 3 rating or above; Max capacity: 256 GB. Use the recommended microSD cards.

Recommended microSD Cards
Lexar 1066x 64GB U3 A2 V30 microSDXC
Lexar 1066x 128GB U3 A2 V30 microSDXC
Kingston Canvas Go! Plus 128GB U3 A2 V30 microSDXC
Lexar 1066x 256GB U3 A2 V30 microSDXC

Post-Processing

Supported Software
DJI Terra

Data Format
DJI Terra supports exporting point cloud models in the following formats:
PNTS/LAS/PLY/PCD/S3MB

In The Box

Zenmuse L2 x1

Lens Cap x1

Carry Case x1

Lens Cleaning Cloth x1

microSD Card (128GB) x1

DJI Zenmuse L2 LIDAR SENSOR for Matrice 300 RTK, Matrice 350 RTK