Ronin-2-Specifications

Electrical and Mechanical
Working Current Static: 300 mA (at 22.8 V)
Dynamic: 500 mA (at 22.8 V)
Locked Motor: Up to 15 A (at 22.8 V)
Performance
Payload Capacity 30 lb / 13.6 kg
Precision of Control ± 0.02°
Maximum Controlled Rotation Speed Pan Axis: 400°/s
Tilt Axis: 360°/s
Roll Axis: 360°/s
Controlled Rotation Range Pan Axis Control: 360° continuous rotation
Tilt Axis Control: +45° to -135°
Roll Axis Control: ±45°
Battery Life Maximum: 8 hours
Typical when Powering Camera/Accessories: 2.5 hours
Gimbal Controller
CPU 32-bit ARM processor
Sensors Independent IMU module
Temperature sensors
Positioning GPS
Operation Modes Underslung Mode
Upright Mode
Briefcase Mode
Interface Built-in touch panel
Receiver
Frequency 2.4 GHz / 5.8 GHz switchable
Connectivity
Wireless Bluetooth 4.0
Wired 1 x D-Bus 
1 x USB Type-C
Accessory Power Ports 4 x 14.4 V Camera Cage (combined 8 A)
2 x 12.6 V Pan Motor (combined 4 A)
1 x 12.6 V P-Tap (8 A)
System Requirements
Assistant Software Windows: 7 or above
macOS: 10.11 or above
iOS: 9 or above
Android: 4.4 or above
Battery
Chemistry Lithium-ion polymer
Capacity 4280 mAh / 97.58 Wh
Voltage 22.8 V
Note Compatible with Inspire 2 flight battery. Not compatible with batteries for prior Ronin models.
General
Camera Tray Dimensions Maximum Depth from the Center of Gravity on Camera Baseplate: 9.6" / 245 mm
Maximum Height Measured from Top of the Camera Baseplate: 6.5" / 165 mm
Maximum Width: 7.1" / 180 mm
Mounting Compatibility Handheld
Car Mount
Aerial
Tripod
Steadicam

Note: Separately available mounting hardware may be required.
Operating Temperature -4 to 122°F / -20 to 50°C
Dimensions (W x D x H) Including Handle Bar: 24.8 x 16.4 x 28.3" / 630 x 416 x 720 mm
Excluding Handle Bar: 13.8 x 16.4 x 20.9" / 350 x 416 x 530 mm
Weight Including Handle Bar: 12 lb / 5.5 kg 
Excluding Handle Bar: 9 lb / 4.2 kg